EXPERT ROOT Project Management

05/27/2020

02:41 AM EXP1904: Reference reaction Analyzing #469 (Открыта): Emission angle of 3He

Calculate an emission angle of 3He in both laboratory and the reaction center of mass systems.

Provide the followi...

05/02/2020

12:24 AM EXP1904: Reference reaction Analyzing #396: Profile of the 10Be beam

We pay attention to the possible discrepancies with task 357.

One may observe that an anticipated position of the ...

05/01/2020

02:27 AM EXP1904: Reference reaction Analyzing #399: Target thickness

We decided to keep the obsolete results of this task and do not update them.

The main reason is that we find out t...

04/22/2020

12:40 AM EXP1904: Reference reaction Analyzing #459 (Открыта): Beam of 10Be

Analysis related to diagnostics of the 10Be beam will be arranged as subtasks of this issue.

12:05 AM EXP1904: Reference reaction Analyzing #458 (Открыта): Fixation of parameters related to experimental setup

Provide essential parameters related to experimental setup basing on results obtained in task 397 (and its subtasks)....

04/07/2020

07:59 AM EXP2003: Express analysis Analyzing #452: Beam projection

Under the condition that at least one wire was fired in each MWPC plane, we observed time distribution for individual...

04/05/2020

12:33 AM EXP2003: Express analysis Analyzing #454: ID plot for F6 detector

To construct an identification plot from the F6 detector, a non-calibrated amplitude in ADC channels from only one PM...

04/04/2020

01:43 AM EXP2003: Express analysis Analyzing #452: Beam projection

Target plane

We worked with the 8He beam particles only (selected by ToF system). We assumed the numbering of MWPC...

12:02 AM EXP2003: Express analysis Analyzing #457: Attempt for relative calibration of side telescope

We checked if the double dE-E line on ID plot reported in task 453 was not caused by issues related to calibration. W...

04/02/2020

04:36 PM EXP2003: Express analysis Analyzing #453: ID plot for side telescope

The first layer of side telescope was calibrated using parameters provided in task 445. The second layer was not cali...